How to Tie a Puff Tie

Many of our customers have asked us how to tie one of our puff ties. It's really straightforward with a bit of practice.

If you'd rather not watch the video:

Step 1

Attach tie around neck using hook. Adjust the tie using the slider until it fits snugly but comfortablly. Let long ends hang loose.

Step 2

Hold the long ends of the tie. Slide one end across the center and under your waistcoat.

Important! As you slide one end of the tie across, be sure to not "fold" the tie, i.e. the part of the slide that's facing forward in figure 1 should still be facing forward. This will create a slight kink in the upper part of the tie, which will help support the "puff" look.

Step 3

Slide the other loose end of the tie across the front of the first end, again being sure that the front of the tie stays forward.

Step 4

With both ends tucked, put your thumbs behind the upper part of the tie, pushing forward slowly to get an even puff look. Be sure that the small "tongue" of fabric is centered, and covers any gap between the fabric on the two sides of the tie.

Step 5

Your tie is puffed. Make any final adjustments, and you're on your way.

These instructions also apply if you're wearing the puff tie without a vest. To hold the tie in place after it's puffed, you will need a tie pin or safety pin the tie from the rear to hide the pin.